Safe and certifiable process
SAFE AND CERTIFIABLE PROCESS – DRYCLEANER does not use gas or chemicals, but only the temperature. The process guarantees uniformity of heating and therefore effective results.
1
DRYCLEANER is entirely built in stainless steel for food use and has a maximum size of 350 x 103 x H.144 cm.
DRYCLEANER treats the fabrics that are introduced with a dry thermal process while they are transported on a 30 cm wide stainless-steel slat belt with independent brushless motors connected in an electric axis with a gearmotor at an adjustable speed of up to 20m / min.
2
DRYCLEANER is completely protected by insulation, suitably made with certified materials for food use, it is contained in waterproof modules to ensure the containment of any dust generated by wear.
3
Input of devices to be sanitized
4
Swivel steel wheels with brake that allow the oven to be moved safely and positioned with height adjustment.
5
The base, made with profiles and press-folded stainless-steel sheets, is equipped with the conveyor belt sliding systems and the lower heating systems to guarantee the achievement of the set temperature.
The temperature that can be set from the operator panel can reach up to 150 ° C, this allows you to adjust the intensity according to the material to be treated.
6
The hood, made with bent stainless-steel profiles and plates, is equipped with the sliding systems of the pressure belt and the upper heating systems to guarantee the achievement of the set temperature.
The hood has the possibility of move vertically with a maximum stroke of 250mm, in this way maintenance operations are facilitated.
The ascent and descent command of the hood is given with two-hand control.
The lifting and closing of the hood are guaranteed by compensation springs for the closing movement, pre-compressed cylinders for cancelling the weight of the hood, automation and adjustment of the up / down movement by means of four rack axes interconnected with the compensation chain, linear actuator with compressed air for handling.
7
The electrical panel, containing the command and control devices of the machine, is integrated in the structure and completely in stainless steel.
General power supply: 400Vac (3P + N + PE) 50 Hz
Total installed power 25kW
8
Operating parameters managed
DRYCLEANER manages the following operating parameters which are acquired and displayed on the touch screen panel display:
- three temperatures measured on the base
- three temperatures measured on the hood
- current absorbed by the heating systems on the base
- current absorbed by the heating systems on the hood
- electrical phase presence control
- conveyor belt speed
- speed of the pressure belt
- position indication of the hood (opening / closing)
- serial connectivity with master module
- network connectivity for remote assistance and remote diagnostics
- internal temperature of the electrical panel
The machine temperature can be set from the operator panel from 75 ° C to 150 ° C. In relation to the material with which the products to be treated are made, sanitization and / or pasteurization treatments can be carried out on these products before proceeding with packaging or other subsequent processing.
| Dimensions | 3500 x 1030 x H 1440 mm |
| Payload | 300 mm |
| Power source | 400VAC 3P+N+PE - 50 Hz |
| Average consumption | 6 ÷ 9 kW/h |
| Performances | Maximum internal oven temperature adjustable up to 150 ° C Feeding speed of the conveyor belts 5 ÷ 20 m / min. |
| General electrical panel | The general electrical panel is in stainless steel and is placed on the machine |
| Operating panel | The machine is managed by PLC, with a touch screen and management software in Italian, placed on the machine. |
| Parameters managed by PLC |
|
| Finishing | External structure, treatment chamber and conveyor belts in stainless steel The use of parts or components of different materials but compatible with food use is envisaged. |
| Industria 4.0 | Certifiable |
WHY CHOOSE DRY CLEANER
2 IN 1 – DRYCLEANER has a technology designed and PATENTED for industrial use in particular for all sanitizing treatments of facial devices, work coats, caps and any other type of fabric.
SAFE AND CERTIFIABLE PROCESS – DRYCLEANER does not use gas or chemicals, but only the temperature. The process guarantees uniformity of heating and therefore effective results. The duration and effectiveness of the treatment depend on the materials that make up the treated products.
CONSUMPTION – Respecting the GO GREEN concept, you can save up energy. The combination of the heating technology permits high energy efficiency and reduce process time and consumption.
MANAGEMENT AND CONNECTIVITY – The oven is programmable from the operator panel, easy to operate touch screen, can store maximum number of recipes. The front panel is designed with a visual signalling system that indicates the indications the progress or the status of the oven.
MAINTENANCE – DRYCLEANER is simple and easy to maintain; ordinary cleaning can be carried out safely by a single operator.
OVEN BUILT WITH HIGH QUALITY MATERIALS AND DESIGNED TO LAST FOR A LONG TIME
